FG-32 : Máy phát sóng 3MHz / đếm tần của Pintek

Máy phát sóng FG-32 của Pintek

Các loại máy phát sóng chuẩn sin, vuông, tam giác của Pintek (Taiwan). Sử dụng để phát tín hiệu chuẩn dùng cho phòng thí nghiệm điện tử, kỹ thuật số.

Vui lòng tham khảo thông số kỹ thuật và bảng giá sản phẩm

FG-32 : Máy phát sóng, máy phát chức năng (Function Generator) của Pintek

Cung cấp đầy đủ CO , CQ

Vui lòng tham khảo bảng giá Pintek

( 3MHz ; 6 Function , 6 Range / 60MHz Auto Counter )

6 FUNCTION,6RANGE.
LINEAR/LOG SWEEP
AUTORANGE COUNTER
0.001Hz RESOLUTION.
AUTO GATETIME.
COUNTER TRIGGER DETECT.

 

FG-32 SPECIFICATIONS
1. GENERAL SPECIFICATIONS:
A: Generator
Frequency -- 0.5Hz ~ 3MHz with 5-digit LED display, Max. resolution 0.001Hz in 6 steps.
Waveform output -- Sine, Square, Triangle, Ramp, Positive Pulse and Negative Pulse; 6 waveforms total.
Stability -- 0.1% ~ 15 minutes after power-on.
0.2% ~ 24hrs after power-on.
B: Counter
Display -- 5 digits 0.36" red LED.
Max. Resolution -- 0.001Hz.
Display unit -- Hz / KHz Automatically controlled by CPU.
C: Common Specification
Limits of operation -- 0℃~40℃,10%~80%R.H.
Storage Environment -- -20℃~70℃,0%~90%R.H.
Power consumption -- 25W.
Power source -- AC 115V (±10%)50/60Hz,FUSE:600mA
AC 230V (±10%)50/60Hz,FUSE:300mA
Ventilation -- DC 12V / 100mA Fan.
Dimensions -- 275 x 90 x 300mm
Weight -- 2.5Kg Net.
Accessory -- Power cord, operating manual.
2. RAMP WAVE:
Frequency: 0.5Hz ~ 2.5MHz, 5-digit LED display, Max. resolution 0.001Hz, 6 steps selected by rotary switch.
Symmetry: 80% (Rise wave) to 20% (Fall wave), < 5%, 1Hz ~ 100KHz.
Rise Wave Linearity: < 2%, 1Hz ~ 100KHz.
3. TRIANGLE WAVE:
Frequency: 0.5Hz ~ 3MHz, 5-digit LED display, Max. resolution 0.001Hz
Symmetry: 50% (Rise wave) to 50% (Fall wave), < 2%, 1Hz ~ 100KHz.
4. SINE WAVE:
Frequency: 0.5Hz ~ 3MHz, 5-digit LED display, Max. resolution 0.001Hz.
Distortion: < 2%, 1Hz ~ 100KHz.
Harmonic Ratio: < 30dB, 100KHz ~ 3MHz
Frequency Response: < 0.1dB, up to 100KHz.
< 1dB, 100KHz to 3MHz.
5. SQUARE WAVE:
Frequency: 0.5Hz ~ 3MHz, 5-digit LED display, Max. resolution 0.001Hz.
Symmetry: 50% (Positive half) to 50% (Negative half). < 2%, 1Hz ~ 100KHz
Rise Time: < 60ns.
6. POSITIVE PULSE:
Frequency: 0.5Hz ~ 2.5MHz, 5-digit LED display.
Width: 0.4sec ~ 100ns, continuous adjustment.
Symmetry: 20% to 80%, < 5%, 1Hz ~ 100KHz.
Rise Time: < 60ns.
7. NEGATIVE PULSE:
Frequency: 0.5Hz ~ 2.5MHz, 5-digit LED display, Max. resolution 0.001Hz.
Width: 0.4sec ~ 100ns.
Symmetry: 80% to 20%, < 5%, 1Hz ~ 100KHz.
Fall Time: < 60ns.
8. MAIN OUTPUT:
Output Impedance: 50W, < 2% Accuracy
Max. Output: 20Vp-p (No-load),±1V
10Vp-p (50Ω load)±0.5V
Min. Output: 0.1Vp-p (No-load), or 0.05Vp-p (50Ω load)
Attenuator: One -20dB Attenuator, < 2% Accuracy
9. SYNCHRONOUS OUTPUT:
Output Impedance: 50Ω, < 2%, Accuracy.
Output Level: TTL level, > 3Vp-p fixed amplitude.
Fan Out: > 20
Rise Time: < 30nS.
10. VCF INPUT:
Input Voltage: 0 ~ 10V
Input Frequency: DC ~ 1KHz
Input Frequency Variance: 1:1 to 1:1000
11. SWEEP SYNCHRONOUS OUTPUT:
Output Impedance: 1KHz, < 2%
Output Waveform: Linear or Log sweep ramp wave.
Output Amplitude: 10Vp-p (No load) or 5Vp-p (1KΩ load)
Output Frequency: 0.2Hz ~ 100Hz continuous adjustment.
12. SWEEP GENERATOR:
Sweep Form: Linear or Log switchable.
Sweep Speed: 5sec ~ 10ms, continuous adjustment.
Sweep Width: 1:1 ~ 1:100
13. COUNTER:
Display: 5 digits, 0.36" red LED display.
Max. Resolution: 0.001Hz
Display unit: Hz / KHz, Auto range.
Time base: 20MHz
Temperature coefficient: < 10ppm / ℃
Accuracy: < 0.002%
Power Supply: +5V, 160mA
Internal Counter:
Range: Auto range with 4 resolutions, 0.001Hz / 0.01Hz / 0.001KHz / 0.01KHz, Auto control by CPU.
Display: 0.500Hz ~ 3000.0KHz, Auto select by CPU.
Gate time: Variable, 0.25sec ~ 2sec, Auto - setting.
Min. display digits: 4 digits.
External Counter:
Max. Input Voltage: < 250Vrms
Input Impedance: 1MΩ, < 2%
Input Frequency: 0.2Hz ~ 60MHz

CÁC MÁY PHÁT SÓNG PINTEK

Chi tiết
Chuyên mục: Pintek
Lượt xem: 22534