Tụ bù epcos phasecap

Tụ bù phasecap của Epcos (Ấn độ). Tụ bù Epcos hiện đang được sử dụng rộng rãi ở Việt nam. Các loại tụ khô thông dụng, điện áp 440V.

PhaseCap Compact capacitors

Construction

  • Concentric winding: Homogeneous distribution of the winding pressure allows better flow of the self-healing gases. No stress overload near the core. Less internal soldering points result in more reliability.
  • Compact design: Thanks to the concentric winding, small dimensions allow high packing density in the panel.

MKK-technology:

  • Metallized polypropylene as dielectric and electrode make the MKK-series suitable for very high current load.
  • Wavy cut and heavy edge: Special way of film cutting leads to lower contact resistance and thus leads to lower contact losses and a higher inrush current capability compared to the straight cut.
  • Cylindrical aluminum can with stud: Easy installation, mounting position upright and/or horizontal possible.

Electrical

  • Very high life expectancy: Reduced investments for maintenance and replacement.
  • High inrush current withstand ability (up to 300 • IR) and high overcurrent capability (up to 1.5 … 2.0 • IR): High inrush and overcurrents mean an extreme stress to the capacitor. The higher the value of withstand ability, the longer the device will operate at best performance, thus avoiding premature failure.

Safely

  • Self healing: The capacitor repairs itself after a punctual overload and remains fully functional during the process. Capacitance losses caused by self-healing are in a neglectable range.
  • Overpressure disconnector: Straightforward disconnection at end of service life or in case of overpressure inside the capacitor.
  • Touch proof terminals: Protection against electric shock, easy connection.
  • Ceramic discharge resistor pre-mounted: Cable connection easy to set up, outstanding thermal dissipation, secure clamping point without affecting the main circuit.



Phương Lai bán tụ bù Epcos Phasecap 3pha 440V có mã như sau :

Product / Type
Ordering code

50 Hz

Output
(kVAr)

IR
(A)

Cr
(uF)

Dimensions
dxh (mm)

B25673A4052A040

5.0

6.6

3 x 27.4

85 x 125

B25673A4072A540

7.5

9.8

3 x 41.1

85 x 162

B25673A4102A040

10.4

13.7

3 x 57

100 x 162

B25673A4122A540

12.5

16.4

3 x 68.5

100 x 162

B25673A4152A040

15.0

19.7

3 x 82.2

100 x 200

B25673A4202A040

20.0

26.2

3 x 109.7

116 x 200

B25673A4252A040

25.0

32.8

3 x 137.1

116 x 200

B25673A4282A140

28.1

36.9

3 x 154.1

136 x 200

B25673A4302A040

30.0

39.4

3 x 164

136 x 200