Protek Z8900

LCR meter Protek Z8900 : High Precision LCR Meter with RS232 and Handler Interfaces, 100Hz, 120Hz, 1KHz and 10KHz test frequencies, 0.1% basic accuracy, 5 digit Back Lit LCD display.

Please preference Specification and Pricelist


  • 100Hz, 120Hz, 1KHz and 10KHz test frequencies
  • 0.1% basic accuracy
  • 5 digit Back Lit LCD display
  • C+R, C+D, L+R, L+Q, R+Q or Z+Θ measurements
  • Built in comparator for sorting components
  • Up to 12 measurements per second
  • RS232 and Handler interfaces
  • Easy to use front panel
  • Short and Open circuit input calibration
  • LCD displays parameter values in Absolute, ∆ or ∆%;


Measured Parameter: R+Q
Measurement Range R: 0.0001Ω to 99.99MΩ
Q: 0.0001 to 9999
Measured Parameter Z+ Θ
Measurement range Z: 0.0001Ω to 99.99MΩ
Θ: -179.99º to 179.99º
Measured Parameter L+Q and L+R
Measurement Range L: 1μH to 9999H (100Hz and 120Hz)
    0.1μH to 999.9H (1KHz)
    0.01μH to 99.99H (10KHz)
Q: 0.0001 to 9999
R: 0.0001Ω to 99.99MΩ
Measured Parameter C+D and C+R
Measurement Range C: 1pF to 19,999μ (100Hz and 120Hz);
    0.1pF to 199.9 μF (1KHz)
    0.01pF to 19.99 μF (10KHz)
D: 0.0001 to 9.999
R: 0.0001Ω to 99.99MΩ
Test Enviroment
Test Voltages 0.1V, 0.3V and 1V
Test Voltage Accuracy ±10%
Test Frequencies 100Hz, 120Hz, 1KHz and 10KHz
Test Frequency Accuracy ±0.02%
Measurement Rates Fast: 12 Measurement/Sec
Medium: 5Measurements/Sec
Slow: 2.5Measurements/Sec
Output Impedance 30Ω and 100Ω
Trigger Auto and Manual
Display type 320 x 240 pixel with backlight
Displayed Value 5 digit, dual display of L, C, R or Z and Q, D or Θ
Parameters Displayed Measured value, ∆ absolute, and ∆%
Measurement Accuracy
Basic Accuracy ±0.1% (See manual for accuracy conditions)
Calibration Zero input correction: Open and Short Circuit
Remote operation RS232 and Handler interfaces
General Specifications
AC Power Requirements 220V or 110V 50/60Hz switch selected
Power consumption ≤20watts
Operating Temperture 10ºC to 30ºC (50ºF to 86ºF) @ ≤70% R.H.
Dimensions (W x H x D): 13" x 6" x 15.7"
Weight 7.7lbs
Accessories Operator's manual, Test Leads with Kelvin clips, Radial lead test fixure with Axial lead adaptor, shorting bar, AC line cord