Please preference Specification and Pricelist
FEATURES / TÍNH NĂNG
- 20MHz Bandwidth
- Alt-Mag sweep for simultaneous display of main and X5 magnified trace
- 1mV/Div Vertical sensitivity
- Alternate trigger for a stable display of unrelated signals
- X5 Sweep Magnification
- Large 6 inch CRT with internal graticule, for parallax free measurements
- Autofocus
- Internal Sync separator circuit for stable triggering on video signals
- Lightweight with low power consumption
- Supplied with 2 (X1, X10) probes and operating manual
| Vertical Amplifier (CH 1 and CH 2) | |
| Sensitivity | 5mV/Div to 5V/Div in 10 steps (1-2-5 seq) X5 Mag: 1mV/Div to 1V/Div |
| Accuracy | ±3% (5% in X5 Mag) |
| Bandwidth (-3dB) | DC to 20MHz |
| Rise Time | < 17.5ns |
| Input Impedance | 1MW + 25pF |
| Input Coupling | AC-Gnd-DC |
| Invert Channel | CH2 |
| Display Modes | CH1, CH2, Add, Dual |
| Chop Frequency | 250kHz ±3% |
| Maximum Input Voltage | 400V (DC or AC peak) |
| CH1 Signal Output | 20mV/Div into 50W: (50Hz to 5MHz) |
| Horizontal Sweep | |
| Sweep Time | 0.1µs/Div to 0.2s/Div in 20 steps (1-2-5 seq) X5 Mag: 20ns/Div to 40ms/div |
| Accuracy | ±3% (±5% in X5 Mag) |
| Display Mode | A, Alt-Mag, XY |
| Sweep Magnifier | X5 ±5% |
| Trace Sep | 1.5 Div Min |
| Horizontal Amplifier | |
| Linearity | ±3% (±5% in X5 Mag) |
| X-Y Mode | CH 1-X axis, CH 2-Y axis |
| Sensitivity | Same as CH 1 Vertical Amplifier |
| Bandwidth (-3dB) | DC to 500kHz |
| Phase Error | £ 3° DC to 50kHz |
| Triggering | |
| Modes | Auto, Norm, TV-V, TV-H |
| Source | CH 1, CH 2, Line, EXT |
| Coupling | AC |
| Slope | Positive or Negative |
| Trigger Sensitivity | Int: DC to 2MHz: 2 Div 2MHz to 20MHz: 3 Div Ext: DC to 2MHz: 200mV P-P; 2MHz to 20MHz: 300mV P-P TV Synch: Int: 1 Div Min; Ext: 1 V P-P Min TV-H (Television Line synchronizing Freq) TV-V (Television Frame synchronizing Freq) Automatically switched by the A Time/Div Front panel control |
| External Trigger Input | Input Impedance: 1 MW+ 20pF Maximum Input Volts: 300V (DC or AC peak) |
| Z Axis Modulation | |
| Sensitivity | 5V P-P (Intensity increases with a negative going input) |
| Bandwidth (-3dB) | DC to 2MHz |
| Input Impedance | Approx. 33 KW |
| Maximum Input Voltage | 30V (DC or AC peak) |
| Calibrator Signal | |
| Frequency | Approx. 1kHz (±20%) |
| Voltage | 0.5V P-P ±3% |
| Duty Cycle | Approx. 50% |
| CRT | |
| Type | 6" rectangular CRT with illuminated internal 8 X 10 Div graticule (1 Div = 1cm) |
| Acceleration Voltage | 2kV |
| General Specification | |
| Power Requirements | AC Input Voltage: 100V, 120V, 220V, 240V ±10% selectable |
| Frequency | 50/60Hz |
| Power Consumption | 35W |
| Operating Temperature | 0 to 40°C |
| DIMensions | 5.5" H x 13.4" W x 14.8" D |
| Weight | 24 lbs. |
| Supplied Accessories | Manual, AC Power cord, (2) X1/X10 Probes |